Item Description
Contact
Export income
Name : Joanna Zhang
Wetchat/ Kakao Speak: JoannaZ4
Cell//imo:
ICQ: 720664199
Office: 22 58283351
High quality 1 inch hydraulic match coupling stainless steel hydraulic hose quick coupling
Our Catalog on the hydraulic connections
| I. Fittings and Adapters | |
| 1.Swaged Metric Fittings | |
| Mertic Flat Seal Fittings | Metric 24°Cone O-RING Seal L..T Fittings |
| Metric Multiseal Fittings | Metric 24°Cone O-RING Seal H.T.Fittings |
| Metric 60°Cone Seal Fittings | Metric Standpipe Straight Fittings |
| Metric 74°Cone Seal Fittings | JIS Metric 60°Cone Seal Fitting |
| 2. Swaged British Fittings | |
| BSP O-RING Seal Fittings | BSP 60°Cone Seal Fittings |
| BSP Flat Seal Fittings | BSPT Fittings |
| BSP Multiseal Fittings | JIS BSP 60°Cone Seal Fittings |
| three. Swaged American Fittings | |
| SAE O-RING Seal Fittings | NPT Fittings |
| ORFS Flat Seal Fittings | SAE Flange L.T. Fittiings |
| NPSM 60°Cone Seal Fittings | SAE Flange H.T.Fittings |
| JIC 74°Cone Seal Fittings | |
| four. Staplelok Fittings | |
| Banjo | interlock Hose Fittings |
| Double relationship | |
| 5. Ferrule | |
| FERRULE for SAE100R1AT/ EN 853 1SN HOSE | FERRULE for SAE100R2A/EN 853 2SN HOSE |
| FERRULE for SAE100R1A EN 853 1ST HOSE | FERRULE for 4SP,4SH/ten-sixteen,R12-06-sixteen HOSE |
| FERRULE for SAE100R2AT/DIN20571 2SN HOSE | FERRULE for 4SH,R12/32 HOSE |
| FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC | |
| six. Metric Adapters | |
| Metric Thread O-RING Encounter Seal Adapters | JIS Metric Thread 60°Cone Adapters |
| Metric Thread Bite Sort Tube Adapters | Metric Thread 74°Cone Flared Tube Adapters |
| 7. British Adapters | |
| BSP Thread 60°Cone Adapters | BSPT Thread Adapters |
| JIS BSP Thread 60°Cone Adapters | |
| eight. American Adapters | |
| NPT Thread Adapters | ORFS Adapters JIC 74°Cone Flared Tube Adapters |
| II.Couplers and clamps:
European / American / Austraulia sort camlock, pin-plug and clamps for big measurement hoses with NPT, BSP thread. |
|
| III.Stainless Metal (316SS / 304SS) & Brass & aluminum fittings:
NPT,JIC,BSP and many others threaded male and feminine fittings & adaptors for lower & high pressure |
|
Thread: metric. We can do metric, bspt, npt, jic, sae thread on customer’s request.
Material: carbon metal, ss304, ss316, brass
Color: White silver, Blue silver, Yellow zinc.
Floor treatment method: Cr+3, Cr+6 zinc plating, zn-ni plating.
Technic: solid
Item Show
Our firm
ZheJiang CZPT Rubber Merchandise Team Co., Ltd, established in 1999, is a manufacturer devoted to the layout, creation, and distribution of all varieties of flexible hoses, fittings, adapters and rapid couplings with excellent top quality regular.
Following twenty many years of advancement, these days the vegetation of CZPT Team has expended to occupy an location of a hundred,000 sq. meters, owns more than 300 nicely-educated staffs and in excess of ten million CZPT creation capacity for each year, in get to fulfill higher demand of the two local and oversea market place. Till now, CZPT Group has been awarded as ‘The CZPT trademark enterprises” and “The very best prime ten enterprises” in China.
Our merchandise catalog
one. SAE 100 R1AT, R2AT, R5, R6, R7, R8, R12, R13, R14,R15
2. DIN EN 853 1SN, 2SN,2ST EN 856 4SP, 4SH
three. SAE100 R14 Teflon hose
four. Jack hose, washing hose, sewer hose
5. SAE100 R4 Air/Drinking water/Oil Suction & Discharge Rubber Hose
6. LPG(gasoline) HOSE, twin welding hose,Steam hose
7. Sandblast Hose,Concrete pump hose
8. Rotary Drilling and Vibrator Hoses, Cement Hoses, and Mud Shipping Hoses
9. Fiber glass fire sleeve(Pyrojacket), Plastic Spiral Guard for Hydraulic Hose
ten. Hydraulic fittings and adaptor
eleven. Crimping device,Skiving device, reducing equipment
FAQ
Q1. Are your organization a manufacturer or investing business?
A: Our organization is a manufacturing firm.
Q2. Can your merchandise be custom-made?
A: Certain, we can offer the customized layout and customized manufacturing for metallic connectors, hose assembly and steel pipe assembly as your specifications.
Q3. Can you make items with my very own model?
A: Sure,we can provide OEM services.
Qfour. What is your phrases of payment?
A: T/T thirty% as deposit, and 70% before delivery. We are going to display you the photos of the items and packages just before you spend the stability.
Q5.What is your port of loading?
A: Xihu (West Lake) Dis.g port
Q6. How about your shipping time?
A: It normally takes fifteen to 30 times,which generally relies upon on the amount of your get and our storage.
| Standard: | Metric |
|---|---|
| Material: | Medium Carbon Steel |
| Connection: | Female |
| Surface Treatment: | Galvanized Sheet |
| Head Type: | Round |
| Thread: | NPT, Bsp |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Types of Couplings
A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.
Mechanical
The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
Electrical
Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.
Flexible
When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
Beam
A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.
Pin & bush
The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
Mesh tooth
Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
editor by CX 2023-04-13