Helical-worm gearmotors
Due to their style and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you expect a drive answer to impress you with its high level of functionality and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular system. In this way, they offer you an enormous range of sizes, equipment ratios and electric motor sizes.
However, their greatest power is definitely their running smoothness and their extremely low noise development. One thing is for certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution that you will hardly also hear.
The overall concept also offers you many more practical product characteristics and benefits. These include the significantly higher performance of the helical-worm combinations as opposed to single helical-worm gear systems. This is one way you save additional energy in the procedure of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with a wide range of AC motors. Furthermore, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm equipment unit and performance-optimized electric motor. Even greater variance can be achieved thanks to the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you are already saving money and time with this selection and task planning. It is because our modular system allows a multitude of mixture options for gear units and motors. You can for that reason reduce operating costs, count on an extended service life and reap the benefits of simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with our AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional toughness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Because of their outstanding performance, these drives can be utilized in every industrial sector and customized to individual torque and velocity requirements. The decrease ratios afforded by the helical-worm equipment stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel material with particular lubricants, optimized shape, this powerful engine achieves high degrees of performance and torque. The casing machined on all sides enables diverse mounting options. Dual chamber shaft seals are utilized as standard.
The low contour design helps it be suitable for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capacity in smaller sized sizes.
Multiple Input Options: helical worm gear motor Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, installation pilots and flanges provide a wide selection of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Keeps contaminants and water away.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new criteria for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration at this point and a really future proof remedy. The EP gear engine offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
EP gear motors adhere to UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total answer for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is usually dust tight and hose proof,and can be utilized outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique mixture of optimized worm wheel materials with particular lubricants and optimized shape, this powerful geared electric motor achieves high degrees of performance and torque. The reduced contour design makes it ideal for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The usage of state of the art helical and worm gear combinations affords optimum performance fulfilling a multitude of ratio requirements. The 800 BR is definitely functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All models adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared motor. A favorably priced alternate for the standard jobs anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC electric motor are directly flange mounted, the pinion is upon the electric motor shaft. This integrated compact design can be an essential factor for the high accuracy and the incredible stiffness of EP geared motors.
For vector-controlled inverter procedure utilization of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are manufactured from case hardened alloy steel and the flanks are precision surface. The worm wheels are made from particular wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also part of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal style. The housings are produced from top quality cast iron. The rugget walls and inner ribbing ensure incredibly torsional stiff and noise dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with durable walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG