ML series quincunx elastic coupling is mainly composed of two protruding teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation and plays a role of automatic compensation.

  LMS...

Plum-shaped elastic couplings are mainly suitable for frequent starting, forward and reverse rotation, medium and high speed, medium torque and high reliability work occasions, such as: metallurgy, mining, petroleum, chemical, lifting, transportation, light industry, textile, Water pumps, fans, etc.Working environment temperature -35℃～+80℃, transmission nominal torque 25～12500Nm, allowable speed 1500～15300r/min. The ML series plum-shaped elastic coupling is mainly composed of two protruding teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation, which plays a role of automatic compensation.

The plum coupling is processed by machining methods such as turning, milling, and broaching, and then undergoes overall heat treatment.In order to ensure sufficient strength of the two types of mechanical plum couplings, there is also a claw plate on the market that is a casting, which can be produced in large quantities and eliminates processing losses.So the price is much lower than machining. But the performance of castings is not very good.It is better not to use it in some important occasions.And the claws of the casting are prone to tooth punching (claws falling off) at high speed or high load.

   ...

ML series quincunx elastic coupling is mainly composed of two protruding teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation and plays a role of automatic compensation.

  Polyurethane quincunx...

The scope of application and performance characteristics of the XL type star elastic coupling High elastic coupling, pump sleeve coupling, LX (XL) type star elastic coupling This coupling polyurethane elastomer is made of convex claws The block restriction can avoid internal deformation caused by impact and external deformation caused by centrifugal force; the large concave surface of the protruding claw makes the surface pressure on the involute tooth very small, and even if the tooth is overloaded, the tooth will not wear or deform.This coupling is made of engineering plastics as an elastic element. It is suitable for connecting two coaxial transmission shafts. It has the properties of compensating for the relative deviation of the two shafts, cushioning, shock absorption, and wear resistance. It is suitable for general occasions and transmits a torque of 20- 35000.NM, working temperature -35-+80 degrees Celsius and interchangeable with German ROTEX coupling

The coupling is made of engineering plastics as an elastic element. It is suitable for connecting two coaxial transmission shafts. It has the properties of compensating for the relative deviation of the two shafts, cushioning, shock absorption, and wear resistance. It is suitable for general occasions and transmits torque of 20-35000. .NM, working temperature -35-+80 degrees Celsius and interchangeable with German ROTEX coupling.

The coupling is made of engineering plastics as an elastic element. It is suitable for connecting two coaxial transmission shafts. It has compensation for the relative offset of the two shafts, cushioning, shock absorption, and wear resistance. It is suitable for general occasions and transmits torque of 20-35000. .NM, working temperature -35-+80 degrees Celsius and interchangeable with German ROTEX coupling.The polyurethane elastomer is limited by the convex claw block, which can avoid internal deformation caused by impact and external deformation caused by centrifugal force; the large concave surface of the convex claw makes the surface pressure on the involute tooth very small, even if the tooth is overloaded , The teeth will not wear or deform.

The coupling is made of engineering plastics as an elastic element. It is suitable for connecting two coaxial transmission shafts. It has compensation for the relative offset of the two shafts, cushioning, shock absorption, and wear resistance. It is suitable for general occasions and transmits torque of 20-35000. .NM, working temperature -35-+80 degrees Celsius and interchangeable with German ROTEX coupling.The polyurethane elastomer is limited by the convex claw block, which can avoid internal deformation caused by impact and external deformation caused by centrifugal force; the large concave surface of the convex claw makes the surface pressure on the involute tooth very small, even if the tooth is overloaded , The teeth will not wear or deform.

The coupling is made of engineering plastics as an elastic element. It is suitable for connecting two coaxial transmission shafts. It has compensation for the relative offset of the two shafts, cushioning, shock absorption, and wear resistance. It is suitable for general occasions and transmits torque of 20-35000. .NM, working temperature -35-+80 degrees Celsius and interchangeable with German ROTEX coupling.The polyurethane elastomer is limited by the convex claw block, which can avoid internal deformation caused by impact and external deformation caused by centrifugal force; the large concave surface of the convex claw makes the surface pressure on the involute tooth very small, even if the tooth is overloaded , The teeth will not wear or deform.